| Customization: | Available |
|---|---|
| Type: | Motion Simulator |
| Output Signal Type: | Digital Output |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Indicator name | Indicator parameters |
| Maximum load weight | 50kg |
| Table size | Φ580mm |
| Mesa material | Stainless steel |
| Countertop flatness | 0.02mm |
| Countertop end runout | 0.03mm |
| Mesa leakage | 0.2mT |
| Perpendicularity of the two axes | ±5" |
| The degree of intersection of two axes | Φ0.25mm ball inside |
| User conductive slip ring | 60~120 rings (rated current not less than 3A) |
| Communication interface | RS232/RS422 |
| Rate resolution | 0.001°/s |
| Angular rate accuracy and rate smoothness |
ω<1°/s, 3×10^-3 (1°average) 1°/s≤ω<10°/s, 3×10^-4 (10°average) ω≥10°/s, 3×10^-5 (360°average) |
| Corner range | 360°continuous rotation |
| Inside frame | |
| Shafting rotation accuracy | ±2" |
| Angular position measurement resolution | 0.36" |
| Angular position positioning accuracy | ±5" |
| Angular positioning repeatability | ±3" |
| Speed range | ±0.001°/s~±500°/s |
| Maximum angular acceleration | 300°/s² (rated load) |
| Outer frame | |
| Shaft system rotation accuracy | ±5" |
| Angular position measurement resolution | 0.36" |
| Angular position positioning accuracy | ±5" |
| Angular positioning repeatability | ±3" |
| Speed range | ±0.001°/s ~ ±200°/s |
| Maximum angular acceleration | 100°/s² (rated load) |
| Product name | High and low temperature test chamber |
| Nominal volume (optional) | 125L~275L |
| Test chamber size (WXDXH) (optional) | 500×500×~650×650×650mm |
| Test chamber outer dimension (WXDXH) (optional) | Approx. : 740*95*950 mm~880×1100×1100mm |
| Temperature range | -60°ºC~+90 °ºC |
| Temperature control range | -60~+90 ºC |
| Temperature fluctuation (optional) | <±0.5ºC~±1ºC |
| Temperature uniformity | <1.0ºC |
| Temperature deviation | <±2.0ºC |
| Cooling rate | >2°C/min |
| Heating rate | >3°C/min |
| Total installed power | Approx. 13KW |
| Weight of the whole machine (box + unit) | Approx. 210kg to 260kg (based on the weight after final confirmation of size) |
| Cooling method | Air cooling |
| Refrigeration method | Mechanical cooling provided by cascade system |
| Refrigerant | Environmentally friendly and highly efficient refrigerants (R404a and R23) |
| Liner material | SUS304 |
| Refrigeration compressor | Two advanced compressors |
| Heating system | Nichrome electric heater with PID adjustment |
| Regulation mode | PID Balance |
| Temperature and Humidity Control | BTHC |
| Control system | Programmable controller + touch screen |
| Remote control | RS485 interface, can communicate with the computer, remote monitoring; And with USB interface |
| Test Port | One O25mm test hole |
| Environmental requirements | Ambient temperature: 0ºC~+30ºC, relative humidity: ≤85%RH, no strong vibration, electromagnetic radiation shielding, no dust and corrosive substances around |
| Power supply system | 380±10% VAC, 50Hz+N+G, ground resistance: <4Ω |
| Safety Measures | Independent ultra-high and ultra-low temperature alarms, A ircraft overheating alarm, refrigeration compressor overpressure/overload alarm; Power supply missing phase, phase sequence alarm; Leakage, short circuit protection. |
){kind=link}